G92 torno: Simple lathe threading cycle
Simple lathe threading cycle; not to be confused with G92 as a datum shift on the mill.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Lathe cycles
- Machine
- Turning, Mill-turn
- Risk
- High
- Example
- G92 X18. Z-25. F1.5
G92 X18. Z-25. F1.5Parameters
- X(U) Z(W)
- Diámetro de la pasada y final en Z; cada bloque G92 X… es una pasada del ciclo. · mm
- F
- Paso de la rosca. · mm/rev
- R
- Conicidad (diferencia de radio entre extremos). · mm
Machine: Turning, Mill-turnRisk: High
Fanuc
G92 X... Z... F...- The meaning depends on the lathe/mill mode and on the control.
Haas
G92 ...- Confirm whether the post-processor uses G92 as threading or as a datum shift.
Other codes in Lathe cycles
Frequently Asked Questions (FAQ)
What does G92 torno mean in a CNC program?
Simple lathe threading cycle; not to be confused with G92 as a datum shift on the mill. In the catalogue it appears as "Simple lathe threading cycle", within the Lathe cycles family.
How is G92 torno written on each control?
Fanuc: G92 X... Z... F... · Haas: G92 .... The exact syntax depends on the control version and the machine parameters: always confirm with the manufacturer's manual.
Can you give me an example of G92 torno?
G92 X18. Z-25. F1.5 — Simple lathe threading cycle; not to be confused with G92 as a datum shift on the mill.
Which machines use G92 torno?
G92 torno is used in: Turning, Mill-turn.
What should you watch out for with G92 torno?
High risk: a mistake here can cause a crash, a broken tool or an out-of-tolerance part. Simulate the program and dry-run it before cutting.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.