Skip to content
Create account

Check a CNC program

The AI reviews your G-code like a senior machinist: errors, risks and time improvements, each with its line and its fix, which you see before applying. With the simulator's warnings and the 2D and 3D toolpath.

+X+YTool centre with G41/G42 compensationHomeHome
0:00 / 1:24
%
O2001 (CYCLE TIME - 80 X 50 PLATE WITH TWO TOOLS)
G21 G17 G40 G49 G80 G90
T1 M06 (END MILL D10)
G54 G00 X-8. Y-8. S3200 M03
G43 H1 Z50. M08
Z2.
G01 Z-3. F300
G41 D1 X0. Y0. F600
Y50.
X80.
Y0.
X0.
G40 X-8. Y-8.
G00 Z50.
T2 M06 (DRILL D8)
G00 X15. Y15. S1800 M03
G43 H2 Z50.
G81 G98 Z-15. R2. F180
X40.
X65.
Y35.
X40.
X15.
G80
G00 Z100. M09 M05
M30
%

CNC diagnosis· Hunt for errors before they occur in the machinePRO

Prepare

28 lines· Fanuc (Series 0i, 30i, 31i, 32i) / ISO Estándar

What it checks

The whole program, like a senior operator before going to the machine. Nothing to set up.

Seguridad y retiradasFeeds and speedsCycle timeHerramientas y orden

Pro feature in development, planned for launch in January 2027. Create free account

AI can make mistakes. Always check the result before using it on the machine.

What does it do

  • Checks safety, homing, G40 and doubtful retracts
  • Flags feeds and speeds that do not match the material or the control
  • Suggests time savings: rapids, tool order and air cutting
  • Each warning comes with its line and, when possible, a fix ready to apply
  • The result will appear here when you press the button.

Guide

Checking a CNC program before running it

A missing feed, a retract through the part or overly conservative parameters are easy to miss when reading quickly. The review goes through the whole program, explains each finding with its line and proposes the fix; the simulator checks each proposal before you apply it.

Real example: the 4-operation plate

What the review found in this page's program, translated from Spanish. Two of the proposals cut the cycle time and the simulator measured them: 22 s and 27 s.

Program

N400 T3 M06
N410 G54 G90 G00 X12.0 Y12.0 S3200 M03
N420 G43 H3 Z25.0
N430 M08
N440 G99 G83 X12.0 Y12.0 Z-19.5 R2.0 Q4.0 F320
N450 X88.0
N460 Y68.0
N470 G98 X12.0
N480 G80
N490 G99 G81 X35.0 Y40.0 Z-8.0 R2.0 F320
N500 G98 X65.0
N510 G80
N520 G00 Z50.0 M09
N530 G28 G91 Z0.0 M05
N540 G90

…

Review

  • Redundant M03 before M29 rigid tapping
  • Very conservative cutting parameters on T1 (aluminium) · −22 s
  • Conservative finishing parameters on T2 · −27 s
  • Tool preselection (next tool on standby)
  • Redundant Z50 retract before G28
1

Like a senior machinist

It looks at what gets checked at the machine: header and modals, compensation, retracts, cycles, cutting parameters for the material and the order of operations.

2

Each finding, with its line and its fix

One click takes you to the line; the fix is shown as a change before applying and can be undone. Nothing is touched without you seeing it.

3

Checked with the simulator

Each proposal is drawn and timed with the simulator's engine: if the toolpath or the time changes, you see it in the suggestion itself.

4

Next to the usual warnings

Without AI, the simulator already warns about impossible values, reversed compensation, rapids through material or machine limits. The review adds what needs shop-floor judgement.

5

Any control

Fanuc, Haas, Siemens Sinumerik, Heidenhain Klartext, Fagor and others, lathe and mill, with macros and subprograms.

Frequently asked questions

Checking a CNC program FAQ

What kind of errors does it find?

From missing feeds or wrong modals to dangerous retracts, reversed compensation and parameters out of range for the material, plus time improvements.

Does it change the program by itself?

No. Each fix is shown as a change and you apply it if it convinces you; it can always be undone.

Does it replace the first-part test?

No: it reduces surprises, but the first part is still run carefully. The review does not know your machine's parameters or offsets.

How is it different from the simulator's warnings?

The simulator's warnings are fixed rules and free. The AI review looks at the program as a whole and gives an opinion the way someone experienced would.

Is it free?

The simulator is free: loading, 2D and 3D view, cycle time and warnings. The AI features are part of GetGCode Pro, currently in closed beta.

Keep going

Related apps