Skip to content
Back to ISO insert code

VBMT 160404: what the insert code means

VBMT 160404 is a 35° rhombic turning insert, positive (5° clearance), tolerance class M, with countersunk hole, chipbreaker on one side. Inscribed circle Ø 9.525 mm, cutting edge 16.6 mm, thickness 4.76 mm and 0.4 mm nose radius. The inch equivalent is VBMT 331. It fits ISO toolholders such as SVJBR.

Equivalent
35°s 4,76α 5°l 16,6

What each position means

  • 1

    Form

    Rhombic 35°

  • 2

    Clearance angle

    5°

  • 3

    Tolerance

    Class M

  • 4

    Hole and chipbreaker

    Hole countersunk 40–60° on one face, chipbreaker on that face

  • 5

    Size

    16.6 mm edge · inscribed circle Ø 9.525 mm

  • 6

    Thickness

    4.76 mm

  • 7

    Nose radius

    r = 0.4 mm

  • 8

    Edge preparation

    Not specified (it's optional)

  • 9

    Cutting direction

    Not specified (it's optional)

VBMT 160404 specifications

Metric code
VBMT 160404
Inch code
VBMT 331
Shape
V · 35°
Clearance angle
5° (positive)
Tolerance (class M)
d ±0.05 a ±0.15 · m ±0.08 a ±0.2 · s ±0.13 mm
Inscribed circle
Ø 9.525 mm
Cutting edge length
16.6 mm
Thickness
4.76 mm
Nose radius
0.4 mm
Usable edges
2 (2 per side)

What VBMT 160404 is used for

A positive 35° insert for profiling, very common on small and Swiss-type lathes and on parts with radii, grooves and tapers. Being positive (5°) it cuts with little force, but the 35° corner is fragile: shallow cuts (up to 1.5-2 mm) and moderate feeds.

It is screwed into SVJBR holders (93°) to copy towards the chuck, or SVVBN (72.5°, neutral) to copy in both directions.

If you need more strength for the same profile, the alternative is the negative VNMG 160404 or 160408, which takes more load at the cost of higher cutting force.

Feed and finish with a 0.4 mm nose radius

Ra ≈ f² / (32 × 0.4) · theoretical value

Ra 0.8 µm

f ≈ 0.1 mm/rev

Ra 1.6 µm

f ≈ 0.14 mm/rev

Ra 3.2 µm

f ≈ 0.2 mm/rev

f 0.1 mm/rev

Ra ≈ 0.78 µm

f 0.2 mm/rev

Ra ≈ 3.13 µm

f 0.3 mm/rev

Ra ≈ 7.03 µm

Other VBMT sizes

CodeInscribed circleThicknessRadiusInch
VBMT 160404Ø 9.5254.760.4VBMT 331
VBMT 160402Ø 9.5254.760.2VBMT 330.5
VBMT 160408Ø 9.5254.760.8VBMT 332
VCMT 160404Ø 9.5254.760.4VCMT 331
VCMT 160408Ø 9.5254.760.8VCMT 332
VBMT 110302Ø 6.353.180.2VBMT 220.5

Full guide: how to read any insert code