Fagor ciclos: Fagor cycles
Fagor-specific cycles for drilling, pockets, profiles and turning.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Equivalences
- Machine
- Milling, Turning
- Risk
- Medium
- Example
- Ciclo fijo según manual Fagor 8055/8065
Ciclo fijo según manual Fagor 8055/8065Machine: Milling, TurningRisk: Medium
Fagor
Ciclos fijos Fagor por modelo de control- The syntax changes between the 8055, 8060 and 8065 families.
Fanuc
- Look for Fanuc/Haas equivalence before porting programs.
Related:
Other codes in Equivalences
Frequently Asked Questions (FAQ)
What does Fagor ciclos mean in a CNC program?
Fagor-specific cycles for drilling, pockets, profiles and turning. In the catalogue it appears as "Fagor cycles", within the Equivalences family.
How is Fagor ciclos written on each control?
Fagor: Ciclos fijos Fagor por modelo de control. The exact syntax depends on the control version and the machine parameters: always confirm with the manufacturer's manual.
Can you give me an example of Fagor ciclos?
Ciclo fijo según manual Fagor 8055/8065 — Fagor-specific cycles for drilling, pockets, profiles and turning.
Which other codes is Fagor ciclos combined with?
In practice Fagor ciclos appears alongside these codes: G81/G82/G83, G71, G76. It is worth reading them together, because the state one leaves behind conditions what the next one does.
Which machines use Fagor ciclos?
Fagor ciclos is used in: Milling, Turning.
What should you watch out for with Fagor ciclos?
Medium risk: it rarely breaks anything on its own, but a wrong value shows up on the part. Check the block before running the batch.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.