Fagor cajeras/perfiles: Fagor pocket and profile cycles
Fagor cycles for machining pockets, profiles, facing and repetitive patterns.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Fagor cycles
- Machine
- Milling
- Risk
- Medium
- Example
- Ciclo de cajera rectangular/circular según control Fagor
Ciclo de cajera rectangular/circular según control FagorMachine: MillingRisk: Medium
Fagor
Ciclos conversacionales Fagor de cajera/perfil- Very dependent on the model and the active programming mode.
- Validates overmetal, depth per pass, entry/exit and radius compensation.
Fanuc · Siemens
- Fanuc: On Fanuc it is usually solved with subprograms, macros or CAM/post-processor.
- Siemens: On Siemens it can be solved with conversational cycles or ShopMill.
Related:G41/G42
Other codes in Fagor cycles
See the full list of G and M codesFrequently Asked Questions (FAQ)
What does Fagor cajeras/perfiles mean in a CNC program?
Fagor cycles for machining pockets, profiles, facing and repetitive patterns. In the catalogue it appears as "Fagor pocket and profile cycles", within the Fagor cycles family.
How is Fagor cajeras/perfiles written on each control?
Fagor: Ciclos conversacionales Fagor de cajera/perfil. The exact syntax depends on the control version and the machine parameters: always confirm with the manufacturer's manual.
Can you give me an example of Fagor cajeras/perfiles?
Ciclo de cajera rectangular/circular según control Fagor — Fagor cycles for machining pockets, profiles, facing and repetitive patterns.
Which other codes is Fagor cajeras/perfiles combined with?
In practice Fagor cajeras/perfiles appears alongside these codes: G41/G42, G54-G59. It is worth reading them together, because the state one leaves behind conditions what the next one does.
Which machines use Fagor cajeras/perfiles?
Fagor cajeras/perfiles is used in: Milling.
What should you watch out for with Fagor cajeras/perfiles?
Medium risk: it rarely breaks anything on its own, but a wrong value shows up on the part. Check the block before running the batch.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.