Back to GSM Code List

Fagor torneado: Fagor turning cycles

Fagor cycles for roughing, finishing, grooving, parting off and threading on the lathe.

For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.

Family
Fagor lathe
Machine
Turning, Mill-turn
Risk
High
Example
Ciclo de desbaste/roscado según manual Fagor
E.g.:
Ciclo de desbaste/roscado según manual Fagor

Machine: Turning, Mill-turnRisk: High

Fagor

Ciclos fijos de torno Fagor por modelo
  • Don't assume a direct equivalence with Fanuc G71/G76.
  • Confirms X/Z signs, allowances, passes, thread exit and diameter/radius mode.

Fanuc · Siemens

  • Fanuc: Conceptual equivalences: G70/G71/G72/G75/G76.
  • Siemens: Conceptual equivalences: CYCLE95, CYCLE97/CYCLE99.

Related:

Frequently Asked Questions (FAQ)

What does Fagor torneado mean in a CNC program?

Fagor cycles for roughing, finishing, grooving, parting off and threading on the lathe. In the catalogue it appears as "Fagor turning cycles", within the Fagor lathe family.

How is Fagor torneado written on each control?

Fagor: Ciclos fijos de torno Fagor por modelo. The exact syntax depends on the control version and the machine parameters: always confirm with the manufacturer's manual.

Can you give me an example of Fagor torneado?

Ciclo de desbaste/roscado según manual Fagor — Fagor cycles for roughing, finishing, grooving, parting off and threading on the lathe.

Which other codes is Fagor torneado combined with?

In practice Fagor torneado appears alongside these codes: G71, G76, G75. It is worth reading them together, because the state one leaves behind conditions what the next one does.

Which machines use Fagor torneado?

Fagor torneado is used in: Turning, Mill-turn.

What should you watch out for with Fagor torneado?

High risk: a mistake here can cause a crash, a broken tool or an out-of-tolerance part. Simulate the program and dry-run it before cutting.

Related tools

CNC G-code Simulator

CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.

CNC Alarms Guide

CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.

Calculate cycle time

Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.