Fanuc G50.3/G54.2: Dynamic part and fixture preset
Preset part coordinate system and dynamic fixture offset in compatible Fanuc controls.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Datums
- Machine
- Milling, Turning, Mill-turn
- Risk
- High
- Example
- G50.3 / G54.2 P...
G50.3 / G54.2 P...Machine: Milling, Turning, Mill-turnRisk: HighManufacturer: Mazak
Fanuc
- Very sensitive to 5-axis configuration, offsets and probing.
- Mazak EIA supports variants of extended/dynamic offsets according to control.
Other codes in Datums
See the full list of G and M codesFrequently Asked Questions (FAQ)
What does Fanuc G50.3/G54.2 mean in a CNC program?
Preset part coordinate system and dynamic fixture offset in compatible Fanuc controls. In the catalogue it appears as "Dynamic part and fixture preset", within the Datums family.
Can you give me an example of Fanuc G50.3/G54.2?
G50.3 / G54.2 P... — Preset part coordinate system and dynamic fixture offset in compatible Fanuc controls.
Which machines use Fanuc G50.3/G54.2?
Fanuc G50.3/G54.2 is used in: Milling, Turning, Mill-turn.
What should you watch out for with Fanuc G50.3/G54.2?
High risk: a mistake here can cause a crash, a broken tool or an out-of-tolerance part. Simulate the program and dry-run it before cutting.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.