G22/G23: Programmed stroke limits
Activates or deactivates zone checking/stored limits according to control.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Safety
- Machine
- Milling, Turning, Mill-turn
- Risk
- High
- Example
- G22 / G23
G22 / G23Parameters
- X Y Z
- Límite superior de la zona prohibida. · mm
- I J K
- Límite inferior de la zona prohibida. · mm
Machine: Milling, Turning, Mill-turnRisk: High
Fanuc
G22 / G23- It depends on parameters; can protect or block machine areas.
ISO común
- It is not universal; check the exact use per control.
Frequently Asked Questions (FAQ)
What does G22/G23 mean in a CNC program?
Activates or deactivates zone checking/stored limits according to control. In the catalogue it appears as "Programmed stroke limits", within the Safety family.
How is G22/G23 written on each control?
Fanuc: G22 / G23. The exact syntax depends on the control version and the machine parameters: always confirm with the manufacturer's manual.
Can you give me an example of G22/G23?
G22 / G23 — Activates or deactivates zone checking/stored limits according to control.
Which machines use G22/G23?
G22/G23 is used in: Milling, Turning, Mill-turn.
What should you watch out for with G22/G23?
High risk: a mistake here can cause a crash, a broken tool or an out-of-tolerance part. Simulate the program and dry-run it before cutting.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.