Heidenhain SEL TABLE/SEL PATTERN: Dimension table/pattern selection

SEL TABLE selects the active datum or tool table. SEL PATTERN selects a position pattern for cycles.

For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.

Family: Heidenhain
Machine: Milling, Mill-turn
Risk: Medium
Example: SEL TABLE "DATUM.D" / SEL PATTERN "HOLES.HU"

Heidenhain SEL TABLE/SEL PATTERN

Heidenhain

Dimension table/pattern selection

E.g.:

SEL TABLE "DATUM.D" / SEL PATTERN "HOLES.HU"

Machine: Milling, Mill-turnRisk: Medium

Heidenhain

The selected table remains active until new selection or reset.

Other codes in Heidenhain

Heidenhain TOOL CALL Heidenhain tool call Heidenhain TOOL DEF Definition of tool Heidenhain CYCL CALL Cycle call Heidenhain LBL Labels and subroutines Heidenhain CALL PGM Subprogram call Heidenhain PATTERN DEF Position pattern Heidenhain APPR/DEP Contour approach and retract Heidenhain CHF/RND Chamfer and rounding Heidenhain CYCL DEF 1/2 Legacy deep drilling and tapping Heidenhain CYCL DEF 7-11 Basic transformations Heidenhain CYCL DEF 14/20 Contour and contour data Heidenhain CYCL DEF 200+ Modern machining cycles

See the full list of G and M codes

Frequently Asked Questions (FAQ)

What does Heidenhain SEL TABLE/SEL PATTERN mean in a CNC program?

SEL TABLE selects the active datum or tool table. SEL PATTERN selects a position pattern for cycles. In the catalogue it appears as "Dimension table/pattern selection", within the Heidenhain family.

Can you give me an example of Heidenhain SEL TABLE/SEL PATTERN?

SEL TABLE "DATUM.D" / SEL PATTERN "HOLES.HU" — SEL TABLE selects the active datum or tool table. SEL PATTERN selects a position pattern for cycles.

Which machines use Heidenhain SEL TABLE/SEL PATTERN?

Heidenhain SEL TABLE/SEL PATTERN is used in: Milling, Mill-turn.

What should you watch out for with Heidenhain SEL TABLE/SEL PATTERN?

Medium risk: it rarely breaks anything on its own, but a wrong value shows up on the part. Check the block before running the batch.

Related tools

CNC G-code Simulator

CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.

CNC Alarms Guide

CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.

Calculate cycle time

Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.