Back to GSM Code List

Hermle M-codes: Hermle auxiliary functions

Hermle auxiliary functions, usually based on Heidenhain, for machine and automation options.

For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.

Family
Hermle manufacturer
Machine
Milling, Mill-turn
Risk
High
Example
M-code Hermle según manual de máquina
E.g.:
M-code Hermle según manual de máquina

Machine: Milling, Mill-turnRisk: HighManufacturer: Hermle

Heidenhain

  • Hermle usually uses Heidenhain, but auxiliary M-codes depend on the builder's PLC.
  • Confirm palletizing, kinematics, blowing/cooling and installed options.

Related:

Frequently Asked Questions (FAQ)

What does Hermle M-codes mean in a CNC program?

Hermle auxiliary functions, usually based on Heidenhain, for machine and automation options. In the catalogue it appears as "Hermle auxiliary functions", within the Hermle manufacturer family.

Can you give me an example of Hermle M-codes?

M-code Hermle según manual de máquina — Hermle auxiliary functions, usually based on Heidenhain, for machine and automation options.

Which other codes is Hermle M-codes combined with?

In practice Hermle M-codes appears alongside these codes: M06, M08/M09, M19, TRAORI. It is worth reading them together, because the state one leaves behind conditions what the next one does.

Which machines use Hermle M-codes?

Hermle M-codes is used in: Milling, Mill-turn.

What should you watch out for with Hermle M-codes?

High risk: a mistake here can cause a crash, a broken tool or an out-of-tolerance part. Simulate the program and dry-run it before cutting.

Related tools

CNC G-code Simulator

CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.

CNC Alarms Guide

CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.

Calculate cycle time

Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.