M130/M131: Show/cancel media

Displays or cancels multimedia content/instructions on some Haas controls.

For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.

Family: Interface
Machine: Milling, Turning, Mill-turn
Risk: Low
Example: M130 / M131

M130/M131

Interface

Show/cancel media

E.g.:

M130 / M131

Machine: Milling, Turning, Mill-turnRisk: Low

Haas

Function aimed at displaying images/instructions; depends on control.

Frequently Asked Questions (FAQ)

What does M130/M131 mean in a CNC program?

Displays or cancels multimedia content/instructions on some Haas controls. In the catalogue it appears as "Show/cancel media", within the Interface family.

Can you give me an example of M130/M131?

M130 / M131 — Displays or cancels multimedia content/instructions on some Haas controls.

Which machines use M130/M131?

M130/M131 is used in: Milling, Turning, Mill-turn.

What should you watch out for with M130/M131?

Low risk: it is a state instruction that rarely causes damage on its own, although it is worth writing it out so you do not depend on the machine's previous state.

Related tools

CNC G-code Simulator

CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.

CNC Alarms Guide

CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.

Calculate cycle time

Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.