Siemens ROT/AROT: Frame rotation

Rotates the coordinate system absolutely or additively.

For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.

Family: Siemens
Machine: Milling, Turning, Mill-turn
Risk: High
Example: ROT Z45 / AROT Z15

Siemens ROT/AROT

Siemens

Frame rotation

E.g.:

ROT Z45 / AROT Z15

Machine: Milling, Turning, Mill-turnRisk: High

Siemens

Can be accumulated with active frames; cancel/restore when applicable.

Other codes in Siemens

Siemens R/MSG/GOTOF Siemens variables and flow control Siemens CYCLE840 Floating tap tapping Siemens CYCLE85-CYCLE89 Siemens boring Siemens HOLES1/HOLES2 Hole patterns Siemens CYCLE73-CYCLE77 Pockets, islands and spigots Siemens CYCLE93-CYCLE98 Siemens grooving, undercut and threads Siemens CYCLE950 Extended roughing Siemens MCALL Modal cycle call Siemens EXTCALL External subprogram call Siemens TRANS/ATRANS Frame translation Siemens SCALE/ASCALE Frame scaling Siemens MIRROR/AMIRROR Frame mirroring

See the full list of G and M codes

Frequently Asked Questions (FAQ)

What does Siemens ROT/AROT mean in a CNC program?

Rotates the coordinate system absolutely or additively. In the catalogue it appears as "Frame rotation", within the Siemens family.

Can you give me an example of Siemens ROT/AROT?

ROT Z45 / AROT Z15 — Rotates the coordinate system absolutely or additively.

Which machines use Siemens ROT/AROT?

Siemens ROT/AROT is used in: Milling, Turning, Mill-turn.

What should you watch out for with Siemens ROT/AROT?

High risk: a mistake here can cause a crash, a broken tool or an out-of-tolerance part. Simulate the program and dry-run it before cutting.

Related tools

CNC G-code Simulator

CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.

CNC Alarms Guide

CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.

Calculate cycle time

Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.