Siemens TRAFOOF: Cancel transformation
Cancels active transformation like TRAORI or other kinematic transformations.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- 5 axes
- Machine
- Milling, Mill-turn
- Risk
- High
- Example
- TRAFOOF
TRAFOOFMachine: Milling, Mill-turnRisk: High
Siemens
- Confirm status of axes and plane before/after canceling transformation.
Other codes in 5 axes
Frequently Asked Questions (FAQ)
What does Siemens TRAFOOF mean in a CNC program?
Cancels active transformation like TRAORI or other kinematic transformations. In the catalogue it appears as "Cancel transformation", within the 5 axes family.
Can you give me an example of Siemens TRAFOOF?
TRAFOOF — Cancels active transformation like TRAORI or other kinematic transformations.
Which machines use Siemens TRAFOOF?
Siemens TRAFOOF is used in: Milling, Mill-turn.
What should you watch out for with Siemens TRAFOOF?
High risk: a mistake here can cause a crash, a broken tool or an out-of-tolerance part. Simulate the program and dry-run it before cutting.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.