Skip to content
Back to ISO toolholder code

PSSNR 2525M12: what the toolholder code means

PSSNR 2525M12 is a right-hand external turning toolholder with lever lock, 45° lead angle κr (offset shank). Shank 25 × 25 mm, 150 mm long. It takes square inserts such as SNMG 12… (size 12).

Insert it takesSNMG 12…SNMM 12…
fκr 45°L 15025 × 25

External toolholder · ISO 5608

  • 1

    Clamping

    Lever in the hole

  • 2

    Insert shape

    Square 90°

  • 3

    Style and lead angle

    κr 45° · offset

  • 4

    Insert clearance angle

    0° (negative)

  • 5

    Hand

    Right-hand

  • 6

    Shank height

    25 mm

  • 7

    Shank width

    25 mm

  • 8

    Length

    150 mm

  • 9

    Insert size

    12.7 mm edge · inscribed circle Ø 12.7 mm

PSSNR 2525M12 specifications

Clamping
P · lever lock
Lead angle κr
45° · offset
Hand
right-hand
Shank (height × width)
25 × 25 mm
Length
150 mm
Insert
SNMG 12… (shape S, clearance N)

What PSSNR 2525M12 is used for

With an SNMG 12 insert (square, negative) at 45°: the chip is thinner than the feed (sin 45° ≈ 0.71) and the edge enters gently and withstands impacts. That is why it is the classic for roughing parts with scale, castings and forgings, and for 45° chamfers.

Each insert has 8 edges (4 per side): one of the cheapest options per edge.

It cannot make square shoulders: it leaves a 45° chamfer at the end of the pass. That needs a 90-95° holder.

Other versions of PSSNR 2525M12

CodeClampingHandShank / barLengthInsert
PSSNR 2525M12P · lever lockright25 × 25 mm150 mmSNMG 12…
PSSNL 2525M12P · lever lockleft25 × 25 mm150 mmSNMG 12…
PSSNR 2020K12P · lever lockright20 × 20 mm125 mmSNMG 12…

Full guide: how to read any toolholder code