Skip to content
Back to ISO toolholder code

S16R-SDUCR07: what the toolholder code means

S16R-SDUCR07 is a right-hand boring bar (Ø 16 mm, 200 mm long) with screw clamp, 93° lead angle κr. Steel bars overhang up to about 4×D, carbide up to about 6×D. It takes 55° rhombic inserts such as DCMT 07… (size 07).

Insert it takesDCMT 07…DCGT 07…
fκr 93°overhang ≤ 4×D = 64 mmclampingL 200bar Ø 16bore ≥ ~22

Boring bar · ISO 6261

  • 1

    Bar type

    Steel bar

  • 2

    Bar diameter

    Ø 16 mm

  • 3

    Length

    200 mm

  • 4

    Clamping

    Through-hole screw

  • 5

    Insert shape

    Rhombic 55°

  • 6

    Style and lead angle

    κr 93°

  • 7

    Insert clearance angle

    7°

  • 8

    Hand

    Right-hand

  • 9

    Insert size

    7.8 mm edge · inscribed circle Ø 6.35 mm

S16R-SDUCR07 specifications

Bar
Ø 16 mm · steel
Clamping
S · screw clamp
Lead angle κr
93°
Hand
right-hand
Length
200 mm
Insert
DCMT 07… (shape D, clearance C)

What S16R-SDUCR07 is used for

A Ø 16 mm, 200 mm bar with DCMT 07 inserts (55°) at 93°: for copying inside small bores, with radii, undercuts and internal tapers. The 55° corner profiles both inwards and outwards.

With a 16 mm steel bar, the comfortable overhang is about 48 mm (3 times the diameter) and the maximum about 64 mm (4 times).

Deeper bores of this diameter need a carbide bar, which goes up to about 6 times the diameter.

Bore and overhang with a Ø 16 bar

Minimum bore (approx.)

≈ Ø 22 mm

Comfortable overhang

≤ 48 mm (3×D)

Maximum overhang (steel)

≤ 64 mm (4×D)

Other versions of S16R-SDUCR07

CodeClampingHandShank / barLengthInsert
S16R-SDUCR07S · screw clamprightØ 16 mm200 mmDCMT 07…
S16R-SDUCL07S · screw clampleftØ 16 mm200 mmDCMT 07…
S12M-SDUCR07S · screw clamprightØ 12 mm150 mmDCMT 07…

Full guide: how to read any toolholder code