DN M10/M11: Plate or clamp open/close DN/Doosan
M-codes commonly used to open/close the chuck, collet or clamping on DN/Doosan lathes, depending on the PLC.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- DN Solutions manufacturer
- Machine
- Turning, Mill-turn
- Risk
- High
- Example
- M10 / M11
M10 / M11Machine: Turning, Mill-turnRisk: HighManufacturer: DN Solutions / Doosan
Fanuc
M10 / M11- On DN/Doosan machines with a Fanuc control it may be mapped to the clamping, but that depends on the PLC and the options.
- Never assume without checking: opening a clamp at the wrong moment is a serious risk.
Related:
Other codes in DN Solutions manufacturer
See the full list of G and M codesFrequently Asked Questions (FAQ)
What does DN M10/M11 mean in a CNC program?
M-codes commonly used to open/close the chuck, collet or clamping on DN/Doosan lathes, depending on the PLC. In the catalogue it appears as "Plate or clamp open/close DN/Doosan", within the DN Solutions manufacturer family.
How is DN M10/M11 written on each control?
Fanuc: M10 / M11. The exact syntax depends on the control version and the machine parameters: always confirm with the manufacturer's manual.
Can you give me an example of DN M10/M11?
M10 / M11 — M-codes commonly used to open/close the chuck, collet or clamping on DN/Doosan lathes, depending on the PLC.
Which other codes is DN M10/M11 combined with?
In practice DN M10/M11 appears alongside these codes: M00/M01, M03/M04/M05. It is worth reading them together, because the state one leaves behind conditions what the next one does.
Which machines use DN M10/M11?
DN M10/M11 is used in: Turning, Mill-turn.
What should you watch out for with DN M10/M11?
High risk: a mistake here can cause a crash, a broken tool or an out-of-tolerance part. Simulate the program and dry-run it before cutting.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.