Back to GSM Code List

DN M31/M32: DN/Doosan chip conveyor

M-codes often used to activate/deactivate chip conveyor on DN/Doosan machines.

For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.

Family
DN Solutions manufacturer
Machine
Milling, Turning, Mill-turn
Risk
Low
Example
M31 / M32
E.g.:
M31 / M32

Machine: Milling, Turning, Mill-turnRisk: LowManufacturer: DN Solutions / Doosan

Fanuc

M31 / M32
  • PLC function: may vary by manufacturer, option and machine configuration.

Related:

Other codes in DN Solutions manufacturer

DN M10/M11 Plate or clamp open/close DN/Doosan
See the full list of G and M codes

Frequently Asked Questions (FAQ)

What does DN M31/M32 mean in a CNC program?

M-codes often used to activate/deactivate chip conveyor on DN/Doosan machines. In the catalogue it appears as "DN/Doosan chip conveyor", within the DN Solutions manufacturer family.

How is DN M31/M32 written on each control?

Fanuc: M31 / M32. The exact syntax depends on the control version and the machine parameters: always confirm with the manufacturer's manual.

Can you give me an example of DN M31/M32?

M31 / M32 — M-codes often used to activate/deactivate chip conveyor on DN/Doosan machines.

Which other codes is DN M31/M32 combined with?

In practice DN M31/M32 appears alongside these codes: M08/M09. It is worth reading them together, because the state one leaves behind conditions what the next one does.

Which machines use DN M31/M32?

DN M31/M32 is used in: Milling, Turning, Mill-turn.

What should you watch out for with DN M31/M32?

Low risk: it is a state instruction that rarely causes damage on its own, although it is worth writing it out so you do not depend on the machine's previous state.

Related tools

CNC G-code Simulator

CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.

CNC Alarms Guide

CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.

Calculate cycle time

Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.