M23/M24: Threaded chamfer exit
Turns the chamfer/automatic pull-out at the end of threading on or off depending on the control.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Lathe
- Machine
- Turning, Mill-turn
- Risk
- Medium
- Example
- M23 / M24
M23 / M24Machine: Turning, Mill-turnRisk: Medium
Haas · Fanuc
- Haas: On Haas lathes it can control chamfer out of thread.
- Fanuc: It depends on the control and the threading cycle used.
Other codes in Lathe
Frequently Asked Questions (FAQ)
What does M23/M24 mean in a CNC program?
Turns the chamfer/automatic pull-out at the end of threading on or off depending on the control. In the catalogue it appears as "Threaded chamfer exit", within the Lathe family.
Can you give me an example of M23/M24?
M23 / M24 — Turns the chamfer/automatic pull-out at the end of threading on or off depending on the control.
Which machines use M23/M24?
M23/M24 is used in: Turning, Mill-turn.
What should you watch out for with M23/M24?
Medium risk: it rarely breaks anything on its own, but a wrong value shows up on the part. Check the block before running the batch.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.