M35/M36/M37: Parts catcher
Control of parts catcher or collection position on equipped winches.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Lathe
- Machine
- Turning, Mill-turn
- Risk
- High
- Example
- M35 / M36 / M37
M35 / M36 / M37Machine: Turning, Mill-turnRisk: High
Haas · Fanuc
- Haas: Optional parts catcher functions; verify path and synchronization with parting.
- Fanuc: Builder/PLC dependent.
Other codes in Lathe
Frequently Asked Questions (FAQ)
What does M35/M36/M37 mean in a CNC program?
Control of parts catcher or collection position on equipped winches. In the catalogue it appears as "Parts catcher", within the Lathe family.
Can you give me an example of M35/M36/M37?
M35 / M36 / M37 — Control of parts catcher or collection position on equipped winches.
Which machines use M35/M36/M37?
M35/M36/M37 is used in: Turning, Mill-turn.
What should you watch out for with M35/M36/M37?
High risk: a mistake here can cause a crash, a broken tool or an out-of-tolerance part. Simulate the program and dry-run it before cutting.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.