M70/M71: Mirror / cancel mirror (some Fanuc)
On some Fanuc and compatible controls: M70 turns mirror mode on, M71 cancels it. Functionally equivalent to G50.1/G51.1.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Transformations
- Machine
- Milling, Mill-turn
- Risk
- High
- Example
- M70 X / M71
M70 X / M71Machine: Milling, Mill-turnRisk: High
Fanuc · ISO común
- Fanuc: Not universal; It depends on PLC and manufacturer parameters. Check before use.
- ISO común: ISO standard uses G50.1/G51.1.
Other codes in Transformations
Frequently Asked Questions (FAQ)
What does M70/M71 mean in a CNC program?
On some Fanuc and compatible controls: M70 turns mirror mode on, M71 cancels it. Functionally equivalent to G50.1/G51.1. In the catalogue it appears as "Mirror / cancel mirror (some Fanuc)", within the Transformations family.
Can you give me an example of M70/M71?
M70 X / M71 — On some Fanuc and compatible controls: M70 turns mirror mode on, M71 cancels it. Functionally equivalent to G50.1/G51.1.
Which machines use M70/M71?
M70/M71 is used in: Milling, Mill-turn.
What should you watch out for with M70/M71?
High risk: a mistake here can cause a crash, a broken tool or an out-of-tolerance part. Simulate the program and dry-run it before cutting.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.