Siemens ATRANS/AROT: Additive translation/rotation

Applies additive shifts or rotations to the Siemens coordinate system.

For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.

Family: Transformations
Machine: Milling, Turning, Mill-turn
Risk: High
Example: ATRANS X10 / AROT Z45

Siemens ATRANS/AROT

Transformations

Additive translation/rotation

E.g.:

ATRANS X10 / AROT Z45

Machine: Milling, Turning, Mill-turnRisk: High

Siemens

It accumulates on top of existing transformations; high risk if not reset.

Other codes in Transformations

G50.1/G51.1 Programmable mirroring M94/M95/M96 Mirror image via M-code Fanuc G72.1/G72.2 Pattern repeat M70/M71 Mirror / cancel mirror (some Fanuc)

See the full list of G and M codes

Frequently Asked Questions (FAQ)

What does Siemens ATRANS/AROT mean in a CNC program?

Applies additive shifts or rotations to the Siemens coordinate system. In the catalogue it appears as "Additive translation/rotation", within the Transformations family.

Can you give me an example of Siemens ATRANS/AROT?

ATRANS X10 / AROT Z45 — Applies additive shifts or rotations to the Siemens coordinate system.

Which machines use Siemens ATRANS/AROT?

Siemens ATRANS/AROT is used in: Milling, Turning, Mill-turn.

What should you watch out for with Siemens ATRANS/AROT?

High risk: a mistake here can cause a crash, a broken tool or an out-of-tolerance part. Simulate the program and dry-run it before cutting.

Related tools

CNC G-code Simulator

CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.

CNC Alarms Guide

CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.

Calculate cycle time

Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.