Mazak M81-M84: Piece/tool measurement
M-codes associated with start/end of part or tool measurement in some Mazak/Integrex.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Mazak manufacturer
- Machine
- Turning, Mill-turn
- Risk
- High
- Example
- M81 / M82 / M83 / M84
M81 / M82 / M83 / M84Machine: Turning, Mill-turnRisk: HighManufacturer: Mazak
ISO común
- Mazak EIA/ISO depends on model, Smooth/Matrix and measurement options.
Other codes in Mazak manufacturer
Frequently Asked Questions (FAQ)
What does Mazak M81-M84 mean in a CNC program?
M-codes associated with start/end of part or tool measurement in some Mazak/Integrex. In the catalogue it appears as "Piece/tool measurement", within the Mazak manufacturer family.
Can you give me an example of Mazak M81-M84?
M81 / M82 / M83 / M84 — M-codes associated with start/end of part or tool measurement in some Mazak/Integrex.
Which machines use Mazak M81-M84?
Mazak M81-M84 is used in: Turning, Mill-turn.
What should you watch out for with Mazak M81-M84?
High risk: a mistake here can cause a crash, a broken tool or an out-of-tolerance part. Simulate the program and dry-run it before cutting.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.