Mazak M90/M91: Mazak main chuck clamping
M90 and M91 control clamping/unclamping of the main chuck on Mazak lathes and mill-turn machines depending on the model.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Mazak manufacturer
- Machine
- Turning, Mill-turn
- Risk
- High
- Example
- M90 (amarrar) / M91 (desamarrar)
M90 (amarrar) / M91 (desamarrar)Machine: Turning, Mill-turnRisk: HighManufacturer: Mazak
ISO común
- The exact assignment varies depending on Mazak model and PLC configuration.
Other codes in Mazak manufacturer
Frequently Asked Questions (FAQ)
What does Mazak M90/M91 mean in a CNC program?
M90 and M91 control clamping/unclamping of the main chuck on Mazak lathes and mill-turn machines depending on the model. In the catalogue it appears as "Mazak main chuck clamping", within the Mazak manufacturer family.
Can you give me an example of Mazak M90/M91?
M90 (amarrar) / M91 (desamarrar) — M90 and M91 control clamping/unclamping of the main chuck on Mazak lathes and mill-turn machines depending on the model.
Which machines use Mazak M90/M91?
Mazak M90/M91 is used in: Turning, Mill-turn.
What should you watch out for with Mazak M90/M91?
High risk: a mistake here can cause a crash, a broken tool or an out-of-tolerance part. Simulate the program and dry-run it before cutting.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.