Okuma M50-M54: Coolant per tool and return cycle
Okuma functions for low/high-pressure through-tool coolant and return levels in canned cycles.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Okuma manufacturer
- Machine
- Milling, Mill-turn
- Risk
- Medium
- Example
- M50 / M51 / M52 / M53 / M54
M50 / M51 / M52 / M53 / M54Machine: Milling, Mill-turnRisk: MediumManufacturer: Okuma
ISO común
- Confirm pressure, TSC option and return behavior.
Other codes in Okuma manufacturer
Frequently Asked Questions (FAQ)
What does Okuma M50-M54 mean in a CNC program?
Okuma functions for low/high-pressure through-tool coolant and return levels in canned cycles. In the catalogue it appears as "Coolant per tool and return cycle", within the Okuma manufacturer family.
Can you give me an example of Okuma M50-M54?
M50 / M51 / M52 / M53 / M54 — Okuma functions for low/high-pressure through-tool coolant and return levels in canned cycles.
Which machines use Okuma M50-M54?
Okuma M50-M54 is used in: Milling, Mill-turn.
What should you watch out for with Okuma M50-M54?
Medium risk: it rarely breaks anything on its own, but a wrong value shows up on the part. Check the block before running the batch.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.