Okuma M73-M75: Threading patterns

Okuma M-codes associated with threading patterns on some lathes.

For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.

Family: Okuma manufacturer
Machine: Turning, Mill-turn
Risk: Medium
Example: M73 / M74 / M75

Okuma M73-M75

Okuma manufacturer

Threading patterns

E.g.:

M73 / M74 / M75

Machine: Turning, Mill-turnRisk: MediumManufacturer: Okuma

ISO común

Validate selected pattern and active threading cycle.

Other codes in Okuma manufacturer

Okuma M-codes Okuma auxiliary functions Okuma M10-M27 Axis clamps and barriers Okuma M50-M54 Coolant per tool and return cycle Okuma M55/M56 Tailstock retract/advance Okuma M58/M59 Low/high clamping pressure Okuma M83/M84 Chuck clamp/unclamp Okuma M201-M220 Okuma M-code macros Okuma G15 H Okuma offset selection Okuma G71/G73/G75-G78 Okuma lathe cycles Okuma M152/M153/M168/M169 Powered tool and C axis Okuma M191/M192 Powered tool orientation Okuma M211-M214 Keyway cutting

See the full list of G and M codes

Frequently Asked Questions (FAQ)

What does Okuma M73-M75 mean in a CNC program?

Okuma M-codes associated with threading patterns on some lathes. In the catalogue it appears as "Threading patterns", within the Okuma manufacturer family.

Can you give me an example of Okuma M73-M75?

M73 / M74 / M75 — Okuma M-codes associated with threading patterns on some lathes.

Which machines use Okuma M73-M75?

Okuma M73-M75 is used in: Turning, Mill-turn.

What should you watch out for with Okuma M73-M75?

Medium risk: it rarely breaks anything on its own, but a wrong value shows up on the part. Check the block before running the batch.

Related tools

CNC G-code Simulator

CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.

CNC Alarms Guide

CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.

Calculate cycle time

Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.