Siemens CFINE/CTRANS: Fine offset and fine translation offset
CFINE applies a fine offset to the active frame without creating a new frame. CTRANS does the same for translation.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Siemens
- Machine
- Milling, Turning, Mill-turn
- Risk
- Medium
- Example
- CFINE(...) / CTRANS(X, 0.05)
CFINE(...) / CTRANS(X, 0.05)Machine: Milling, Turning, Mill-turnRisk: Medium
Siemens
- Useful for micro-corrections without modifying the base frame; remember to reset when finished.
Other codes in Siemens
Frequently Asked Questions (FAQ)
What does Siemens CFINE/CTRANS mean in a CNC program?
CFINE applies a fine offset to the active frame without creating a new frame. CTRANS does the same for translation. In the catalogue it appears as "Fine offset and fine translation offset", within the Siemens family.
Can you give me an example of Siemens CFINE/CTRANS?
CFINE(...) / CTRANS(X, 0.05) — CFINE applies a fine offset to the active frame without creating a new frame. CTRANS does the same for translation.
Which machines use Siemens CFINE/CTRANS?
Siemens CFINE/CTRANS is used in: Milling, Turning, Mill-turn.
What should you watch out for with Siemens CFINE/CTRANS?
Medium risk: it rarely breaks anything on its own, but a wrong value shows up on the part. Check the block before running the batch.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.