Siemens MEASA/MEAWA/MEAC: Siemens shaft measurement

Axis-specific measurement functions: MEASA measures in motion, MEAWA waits for measured position, MEAC continuous measurement.

For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.

Family: Siemens
Machine: Milling, Turning, Mill-turn
Risk: Medium
Example: MEASA(AX1, ...) / MEAWA(...)

Siemens MEASA/MEAWA/MEAC

Siemens

Siemens shaft measurement

E.g.:

MEASA(AX1, ...) / MEAWA(...)

Machine: Milling, Turning, Mill-turnRisk: Medium

Siemens

They require an additional probe or encoder; review active measurement software.

Other codes in Siemens

Siemens R/MSG/GOTOF Siemens variables and flow control Siemens CYCLE840 Floating tap tapping Siemens CYCLE85-CYCLE89 Siemens boring Siemens HOLES1/HOLES2 Hole patterns Siemens CYCLE73-CYCLE77 Pockets, islands and spigots Siemens CYCLE93-CYCLE98 Siemens grooving, undercut and threads Siemens CYCLE950 Extended roughing Siemens MCALL Modal cycle call Siemens EXTCALL External subprogram call Siemens ROT/AROT Frame rotation Siemens TRANS/ATRANS Frame translation Siemens SCALE/ASCALE Frame scaling

See the full list of G and M codes

Frequently Asked Questions (FAQ)

What does Siemens MEASA/MEAWA/MEAC mean in a CNC program?

Axis-specific measurement functions: MEASA measures in motion, MEAWA waits for measured position, MEAC continuous measurement. In the catalogue it appears as "Siemens shaft measurement", within the Siemens family.

Can you give me an example of Siemens MEASA/MEAWA/MEAC?

MEASA(AX1, ...) / MEAWA(...) — Axis-specific measurement functions: MEASA measures in motion, MEAWA waits for measured position, MEAC continuous measurement.

Which machines use Siemens MEASA/MEAWA/MEAC?

Siemens MEASA/MEAWA/MEAC is used in: Milling, Turning, Mill-turn.

What should you watch out for with Siemens MEASA/MEAWA/MEAC?

Medium risk: it rarely breaks anything on its own, but a wrong value shows up on the part. Check the block before running the batch.

Related tools

CNC G-code Simulator

CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.

CNC Alarms Guide

CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.

Calculate cycle time

Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.