Siemens SUPA/G500/G153: Delete/cancel offsets and frames

Functions to delete offsets/frame en bloc or return to basic coordinate states.

For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.

Family: Siemens
Machine: Milling, Turning, Mill-turn
Risk: High
Example: SUPA G0 Z0 / G500 / G153

Siemens SUPA/G500/G153

Siemens

Delete/cancel offsets and frames

E.g.:

SUPA G0 Z0 / G500 / G153

Machine: Milling, Turning, Mill-turnRisk: High

Siemens

Very useful for safe withdrawals, but dangerous if the active system is confused.

Other codes in Siemens

Siemens R/MSG/GOTOF Siemens variables and flow control Siemens CYCLE840 Floating tap tapping Siemens CYCLE85-CYCLE89 Siemens boring Siemens HOLES1/HOLES2 Hole patterns Siemens CYCLE73-CYCLE77 Pockets, islands and spigots Siemens CYCLE93-CYCLE98 Siemens grooving, undercut and threads Siemens CYCLE950 Extended roughing Siemens MCALL Modal cycle call Siemens EXTCALL External subprogram call Siemens ROT/AROT Frame rotation Siemens TRANS/ATRANS Frame translation Siemens SCALE/ASCALE Frame scaling

See the full list of G and M codes

Frequently Asked Questions (FAQ)

What does Siemens SUPA/G500/G153 mean in a CNC program?

Functions to delete offsets/frame en bloc or return to basic coordinate states. In the catalogue it appears as "Delete/cancel offsets and frames", within the Siemens family.

Can you give me an example of Siemens SUPA/G500/G153?

SUPA G0 Z0 / G500 / G153 — Functions to delete offsets/frame en bloc or return to basic coordinate states.

Which machines use Siemens SUPA/G500/G153?

Siemens SUPA/G500/G153 is used in: Milling, Turning, Mill-turn.

What should you watch out for with Siemens SUPA/G500/G153?

High risk: a mistake here can cause a crash, a broken tool or an out-of-tolerance part. Simulate the program and dry-run it before cutting.

Related tools

CNC G-code Simulator

CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.

CNC Alarms Guide

CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.

Calculate cycle time

Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.