Skip to content
Back to ISO insert code

16ER 1.5 ISO: what the threading insert code means

16ER 1.5 ISO is a laydown threading insert, size 16 (3/8" inscribed circle), for external threads, right-hand, ISO metric 60° profile, 1.5 mm pitch. Full profile: it also forms the crest, one insert per pitch. It goes in a SER 2525M16 holder or similar.

Tool holder: SER 2525M16 (shank or bar, depending on your machine)

16 · IC 9,52560°P 1,5exterior (tornillo)

What each position means

  • 1

    Size

    16,5 mm side · inscribed circle Ø 9,525 mm (3/8")

    The toolholder has to be the same size (…16 for 16 inserts).

  • 2

    External or internal

    External (bolt thread)

    Fits toolholders SER / SEL.

  • 3

    Hand

    Right-hand

    It's the hand of the toolholder, not of the thread: with an R insert you can cut left-hand threads by reversing the feed direction or the spindle rotation.

  • 4

    Pitch

    1,5 mm

  • 5

    Profile

    ISO metric 60°

    Full profile: it also forms the crest. One insert per pitch.

16ER 1.5 ISO specifications

Size
16 · IC 3/8" (Ø 9.525 mm)
Thread
external (bolt)
Hand
right-hand
Profile
ISO · 60°
Pitch
1.5 mm

What 16ER 1.5 ISO is used for

A full-profile insert for external metric threads with 1.5 mm pitch: the coarse M10 and fine threads such as M12×1.5, M16×1.5 and M20×1.5.

Because it also forms the crest, the thread comes out with its exact shape and no burr. So the major diameter is turned to nominal size or a few tenths under, not more.

It goes in size 16 SER holders (for example SER 2525M16). The pitch is fixed, so another pitch needs another insert; if you cut many different pitches, the alternative is the 16ER AG60 partial profile.

Depth and passes

Thread depth (radial)

≈ 0.92 mm

Metric thread with this pitch

M10 (coarse) · fine M… × 1.5

Typical passes

6–9

16ER 1.5 ISO variants

CodeThreadHandPitch
16ER 1.5 ISOexternalright1.5 mm
16ER 1.0 ISOexternalright1 mm
16ER 1.25 ISOexternalright1.25 mm
16ER 1.75 ISOexternalright1.75 mm
16ER 2.0 ISOexternalright2 mm
16EL 1.5 ISOexternalleft1.5 mm

Holders that take it

Other threading inserts

Full guide: how to read any insert code