16IR AG60: what the threading insert code means
16IR AG60 is a laydown threading insert, size 16 (3/8" inscribed circle), for internal threads, right-hand, partial 60° profile, pitches from 0.5 to 3 mm. Partial profile: it does not form the crest, so one insert covers several pitches. It goes in a SIR 0020Q16 holder or similar.
Tool holder: SIR 0020Q16 (shank or bar, depending on your machine)
What each position means
- 1
Size
16,5 mm side · inscribed circle Ø 9,525 mm (3/8")
The toolholder has to be the same size (…16 for 16 inserts).
- 2
External or internal
Internal (nut thread)
Fits boring bars SIR / SIL.
- 3
Hand
Right-hand
It's the hand of the toolholder, not of the thread: with an R insert you can cut left-hand threads by reversing the feed direction or the spindle rotation.
- 5
Profile
Partial 60°
Partial profile: it doesn't form the crest, so it covers pitches from 0,5 to 3 mm. Handy, but the thread comes out slightly less accurate than with a full profile.
16IR AG60 specifications
- Size
- 16 · IC 3/8" (Ø 9.525 mm)
- Thread
- internal (nut)
- Hand
- right-hand
- Profile
- AG60 · 60°
- Pitch
- 0.5–3 mm
What 16IR AG60 is used for
An internal threading insert with a 60° partial profile: one insert cuts metric or UN threads from 0.5 to 3 mm pitch. It is the practical choice for a shop that threads varied nuts and bores without one insert per pitch.
Since it does not form the crest, the nut's crest is left by the pre-bore: machine it to size (roughly D − P for metric, for example Ø 10.5 for M12×1.5).
It goes in size 16 SIR bars. The minimum bore it fits depends on the bar and the brand; smaller bores take size 11 inserts.
Internal thread depth for each pitch
P 0.5 · M3
h ≈ 0.27 mm
P 0.7 · M4
h ≈ 0.38 mm
P 0.75 · fine
h ≈ 0.41 mm
P 0.8 · M5
h ≈ 0.43 mm
P 1 · M6
h ≈ 0.54 mm
P 1.25 · M8
h ≈ 0.68 mm
P 1.5 · M10
h ≈ 0.81 mm
P 1.75 · M12
h ≈ 0.95 mm
P 2 · M14–M16
h ≈ 1.08 mm
P 2.5 · M18–M22
h ≈ 1.35 mm
P 3 · M24–M27
h ≈ 1.62 mm