Skip to content
Back to ISO toolholder code

SIR 0020Q16: what the threading holder code means

SIR 0020Q16 is a right-hand internal threading bar for laydown inserts size 16. Bar Ø 20 mm, 180 mm long. It takes inserts such as 16IR 1.5 ISO.

S1
f60°overhang ≤ 4×D = 80 mmclampingL 180bar Ø 20bore ≥ ~27

Internal threading bar

  • 1S

    Series

    Standard screw-clamp series

  • 2

    External or internal

    Internal: bar for nut threads

  • 3

    Hand

    Right-hand

  • 4

    Bar diameter

    Ø 20 mm

  • 5

    Length

    180 mm

  • 6

    Insert size

    Size 16 threading inserts (3/8")

SIR 0020Q16 specifications

Type
Internal threading (bar)
Hand
right-hand
Bar diameter
Ø 20 mm
Length
180 mm
Inserts
16IR …

What SIR 0020Q16 is used for

A Ø 20 mm, 180 mm internal threading bar for 16IR inserts. It threads nuts and bores from about 22-25 mm, depending on the brand.

As with every bar, overhang rules: in steel it works well up to about 60-80 mm without chatter. Always use the thickest bar that fits the bore.

Smaller bores take size 11 inserts (11IR) on 12 to 16 mm bars.

Inside a bore the chip has nowhere to go. In blind bores leave a thread undercut (a groove) of at least two or three pitches at the bottom, so the insert ends each pass without touching the bottom, and if the bar has internal coolant, use it: chips come out much better.

Example: an internal M24 × 1.5 with a 16IR AG60 insert takes about 0.81 mm radial depth (0.5413 × 1.5) on a Ø 22.5 mm pre-bore.

Other versions of SIR 0020Q16

CodeClampingHandShank / barLengthInsert
SIR 0020Q16SrightØ 20 mm180 mm16IR 1.5 ISO…
SIL 0020Q16SleftØ 20 mm180 mm16IL 1.5 ISO…
SIR 0016P16SrightØ 16 mm170 mm16IR 1.5 ISO…
SIR 0025R16SrightØ 25 mm200 mm16IR 1.5 ISO…

Inserts it takes

Full guide: how to read any toolholder code