SER 2525M16: what the threading holder code means
SER 2525M16 is a right-hand external threading toolholder for laydown inserts size 16. Shank 25 × 25 mm, 150 mm long. It takes inserts such as 16ER 1.5 ISO.
External threading toolholder
- 1S
Series
Standard screw-clamp series
- 2
External or internal
External: bolt thread
- 3
Hand
Right-hand
- 4
Shank
25 × 25 mm (height × width)
- 5
Length
150 mm
- 6
Insert size
Size 16 threading inserts (3/8")
SER 2525M16 specifications
- Type
- External threading
- Hand
- right-hand
- Shank
- 25 × 25 mm
- Length
- 150 mm
- Inserts
- 16ER …
What SER 2525M16 is used for
An external threading holder for size 16 (3/8″) laydown inserts, the most common size. The same holder cuts every pitch and profile by changing only the insert: 16ER 1.5 ISO, 16ER AG60, 16ER 14UN…
The insert is tilted by a shim according to the thread helix angle; for large pitches or small diameters there are shims with a different tilt.
For left-hand threads use the SEL, or reverse the feed or spindle direction depending on the machine.
When mounting it, the tip must sit at centre height and the holder at 90° to the axis: a couple of degrees of twist already makes one thread flank wider than the other. Check it by resting a 60° thread gauge on the part.
Example: an external M16 × 1.5 with a 16ER 1.5 ISO insert takes about 0.92 mm radial depth (0.6134 × 1.5), split into 6 to 9 ever finer passes.
Other versions of SER 2525M16
| Code | Clamping | Hand | Shank / bar | Length | Insert |
|---|---|---|---|---|---|
| SER 2525M16 | S | right | 25 × 25 mm | 150 mm | 16ER 1.5 ISO… |
| SEL 2525M16 | S | left | 25 × 25 mm | 150 mm | 16EL 1.5 ISO… |
| SER 2020K16 | S | right | 20 × 20 mm | 125 mm | 16ER 1.5 ISO… |
| SER 1616H16 | S | right | 16 × 16 mm | 100 mm | 16ER 1.5 ISO… |