Skip to content
Back to ISO insert code

CNMG 120408: what the insert code means

CNMG 120408 is an 80° rhombic turning insert, negative (0° clearance), tolerance class M, with cylindrical hole, chipbreaker on both sides. Inscribed circle Ø 12.7 mm, cutting edge 12.9 mm, thickness 4.76 mm and 0.8 mm nose radius. The inch equivalent is CNMG 432. It fits ISO toolholders such as PCLNR.

Equivalent
80°s 4,76α 0°l 12,9

What each position means

  • 1

    Form

    Rhombic 80°

  • 2

    Clearance angle

    0° (negative)

  • 3

    Tolerance

    Class M

  • 4

    Hole and chipbreaker

    Cylindrical hole, chipbreaker on both faces

  • 5

    Size

    12.9 mm edge · inscribed circle Ø 12.7 mm

  • 6

    Thickness

    4.76 mm

  • 7

    Nose radius

    r = 0.8 mm

  • 8

    Edge preparation

    Not specified (it's optional)

  • 9

    Cutting direction

    Not specified (it's optional)

CNMG 120408 specifications

Metric code
CNMG 120408
Inch code
CNMG 432
Shape
C · 80°
Clearance angle
0° (negative)
Tolerance (class M)
d ±0.05 a ±0.15 · m ±0.08 a ±0.2 · s ±0.13 mm
Inscribed circle
Ø 12.7 mm
Cutting edge length
12.9 mm
Thickness
4.76 mm
Nose radius
0.8 mm
Usable edges
4 (2 per side, both sides)

What CNMG 120408 is used for

It is probably the best-selling turning insert: nearly every maker offers it in several grades (for steel, stainless and cast iron) and with several chipbreakers. That makes it the reference for comparing brands and prices, and the one worth always keeping in the drawer.

As a guide, in steel it does medium roughing at 1 to 4 mm depth of cut and 0.2 to 0.35 mm/rev feed; with a finishing chipbreaker it leaves a good surface at 0.1-0.15 mm/rev. Each maker's chipbreaker gives the exact ranges.

Typical mistake: using it on long, thin parts without a tailstock. The 80° corner and 0.8 radius push the part and chatter appears; there, drop to a 0.4 radius or move to a 55° insert.

Feed and finish with a 0.8 mm nose radius

Ra ≈ f² / (32 × 0.8) · theoretical value

Ra 0.8 µm

f ≈ 0.14 mm/rev

Ra 1.6 µm

f ≈ 0.2 mm/rev

Ra 3.2 µm

f ≈ 0.29 mm/rev

f 0.1 mm/rev

Ra ≈ 0.39 µm

f 0.2 mm/rev

Ra ≈ 1.56 µm

f 0.3 mm/rev

Ra ≈ 3.52 µm

Other CNMG sizes

CodeInscribed circleThicknessRadiusInch
CNMG 120408Ø 12.74.760.8CNMG 432
CNMG 120404Ø 12.74.760.4CNMG 431
CNMG 120412Ø 12.74.761.2CNMG 433
CNMG 120416Ø 12.74.761.6CNMG 434
CNMG 160608Ø 15.8756.350.8CNMG 542
CNMG 160612Ø 15.8756.351.2CNMG 543
CNMG 190612Ø 19.056.351.2CNMG 643
CNMG 190616Ø 19.056.351.6CNMG 644

Toolholders that take it

Similar inserts

Full guide: how to read any insert code