Skip to content
Back to ISO toolholder code

PCLNR 2525M12: what the toolholder code means

PCLNR 2525M12 is a right-hand external turning toolholder with lever lock, 95° lead angle κr (offset shank). Shank 25 × 25 mm, 150 mm long. It takes 80° rhombic inserts such as CNMG 12… (size 12).

Insert it takesCNMG 12…CNMM 12…
fκr 95°L 15025 × 25

External toolholder · ISO 5608

  • 1

    Clamping

    Lever in the hole

  • 2

    Insert shape

    Rhombic 80°

  • 3

    Style and lead angle

    κr 95° · offset

  • 4

    Insert clearance angle

    0° (negative)

  • 5

    Hand

    Right-hand

  • 6

    Shank height

    25 mm

  • 7

    Shank width

    25 mm

  • 8

    Length

    150 mm

  • 9

    Insert size

    12.9 mm edge · inscribed circle Ø 12.7 mm

PCLNR 2525M12 specifications

Clamping
P · lever lock
Lead angle κr
95° · offset
Hand
right-hand
Shank (height × width)
25 × 25 mm
Length
150 mm
Insert
CNMG 12… (shape C, clearance N)

What PCLNR 2525M12 is used for

The most common external turning holder: with a CNMG 12 insert it turns, faces and reaches square shoulders thanks to the 95° lead angle.

The lever (P) pulls the insert against the seat through the hole and leaves the face clear for the chip. For very heavy roughing the rigid-clamp version, DCLNR, is used.

The 25 mm shank is the standard on medium lathes; small lathes use the 2020K12 and large ones the 3225P12. Typical mistake: mounting it below centre; the tip must sit at the spindle axis height.

Other versions of PCLNR 2525M12

CodeClampingHandShank / barLengthInsert
PCLNR 2525M12P · lever lockright25 × 25 mm150 mmCNMG 12…
PCLNL 2525M12P · lever lockleft25 × 25 mm150 mmCNMG 12…
DCLNR 2525M12D · rigid clampright25 × 25 mm150 mmCNMG 12…
MCLNR 2525M12M · top clamp and pinright25 × 25 mm150 mmCNMG 12…
PCLNR 2020K12P · lever lockright20 × 20 mm125 mmCNMG 12…
PCLNR 3225P12P · lever lockright32 × 25 mm170 mmCNMG 12…
PCLNR 2525M16P · lever lockright25 × 25 mm150 mmCNMG 16…

Inserts it takes

Similar toolholders

Full guide: how to read any toolholder code