SCLCR 2020K09: what the toolholder code means
SCLCR 2020K09 is a right-hand external turning toolholder with screw clamp, 95° lead angle κr (offset shank). Shank 20 × 20 mm, 125 mm long. It takes 80° rhombic inserts such as CCMT 09… (size 09).
External toolholder · ISO 5608
- 1
Clamping
Through-hole screw
- 2
Insert shape
Rhombic 80°
- 3
Style and lead angle
κr 95° · offset
- 4
Insert clearance angle
7°
- 5
Hand
Right-hand
- 6
Shank height
20 mm
- 7
Shank width
20 mm
- 8
Length
125 mm
- 9
Insert size
9.7 mm edge · inscribed circle Ø 9.525 mm
SCLCR 2020K09 specifications
- Clamping
- S · screw clamp
- Lead angle κr
- 95° · offset
- Hand
- right-hand
- Shank (height × width)
- 20 × 20 mm
- Length
- 125 mm
- Insert
- CCMT 09… (shape C, clearance C)
What SCLCR 2020K09 is used for
An external holder for positive, screw-clamped CCMT 09 inserts at 95°. It cuts with little force: the one used on small, low-power lathes and on thin parts, where a negative insert would push too much.
The screw leaves the insert face clear for the chip, with no clamp in the way.
With a 20 × 20 shank it fits small turrets; the 1616H09 version is used on Swiss-type lathes.
Other versions of SCLCR 2020K09
| Code | Clamping | Hand | Shank / bar | Length | Insert |
|---|---|---|---|---|---|
| SCLCR 2020K09 | S · screw clamp | right | 20 × 20 mm | 125 mm | CCMT 09… |
| SCLCL 2020K09 | S · screw clamp | left | 20 × 20 mm | 125 mm | CCMT 09… |
| SCLCR 1616H09 | S · screw clamp | right | 16 × 16 mm | 100 mm | CCMT 09… |
| SCLCR 1212F09 | S · screw clamp | right | 12 × 12 mm | 80 mm | CCMT 09… |
| SCLCR 2525M12 | S · screw clamp | right | 25 × 25 mm | 150 mm | CCMT 12… |