Skip to content
Back to ISO insert code

CCGT 09T302: what the insert code means

CCGT 09T302 is an 80° rhombic turning insert, positive (7° clearance), tolerance class G, with countersunk hole, chipbreaker on one side. Inscribed circle Ø 9.525 mm, cutting edge 9.7 mm, thickness 3.97 mm and 0.2 mm nose radius. The inch equivalent is CCGT 32.50.5. It fits ISO toolholders such as SCLCR.

Equivalent
80°s 3,97α 7°l 9,7

What each position means

  • 1

    Form

    Rhombic 80°

  • 2

    Clearance angle

    7°

  • 3

    Tolerance

    Class G

  • 4

    Hole and chipbreaker

    Hole countersunk 40–60° on one face, chipbreaker on that face

  • 5

    Size

    9.7 mm edge · inscribed circle Ø 9.525 mm

  • 6

    Thickness

    3.97 mm

  • 7

    Nose radius

    r = 0.2 mm

  • 8

    Edge preparation

    Not specified (it's optional)

  • 9

    Cutting direction

    Not specified (it's optional)

CCGT 09T302 specifications

Metric code
CCGT 09T302
Inch code
CCGT 32.50.5
Shape
C · 80°
Clearance angle
7° (positive)
Tolerance (class G)
d ±0.025 · m ±0.025 · s ±0.13 mm
Inscribed circle
Ø 9.525 mm
Cutting edge length
9.7 mm
Thickness
3.97 mm
Nose radius
0.2 mm
Usable edges
2 (2 per side)

What CCGT 09T302 is used for

The G tolerance means it is ground on the periphery: a very sharp edge and precise dimensions. It is the typical insert for aluminium, copper and plastics (in uncoated or polished grades) and for fine finishing in steel and stainless at small depths of cut.

The 0.2 mm radius leaves a good finish at small feeds and barely pushes the part: good for thin parts and for boring with small bars.

Typical mistake: roughing steel with it. Such a sharp edge chips quickly; that is what the CCMT, with a stronger edge, is for.

Feed and finish with a 0.2 mm nose radius

Ra ≈ f² / (32 × 0.2) · theoretical value

Ra 0.8 µm

f ≈ 0.07 mm/rev

Ra 1.6 µm

f ≈ 0.1 mm/rev

Ra 3.2 µm

f ≈ 0.14 mm/rev

f 0.1 mm/rev

Ra ≈ 1.56 µm

f 0.2 mm/rev

Ra ≈ 6.25 µm

f 0.3 mm/rev

Ra ≈ 14.06 µm

Other CCGT sizes

CodeInscribed circleThicknessRadiusInch
CCGT 09T302Ø 9.5253.970.2CCGT 32.50.5
CCGT 060201Ø 6.352.380.1—
CCGT 060202Ø 6.352.380.2CCGT 21.50.5
CCGT 09T301Ø 9.5253.970.1—
CCGT 09T304Ø 9.5253.970.4CCGT 32.51

Toolholders that take it

Similar inserts

Full guide: how to read any insert code