Skip to content
Back to ISO toolholder code

S20S-SCLCR09: what the toolholder code means

S20S-SCLCR09 is a right-hand boring bar (Ø 20 mm, 250 mm long) with screw clamp, 95° lead angle κr (offset shank). Steel bars overhang up to about 4×D, carbide up to about 6×D. It takes 80° rhombic inserts such as CCMT 09… (size 09).

Insert it takesCCMT 09…CCGT 09…
fκr 95°overhang ≤ 4×D = 80 mmclampingL 250bar Ø 20bore ≥ ~27

Boring bar · ISO 6261

  • 1

    Bar type

    Steel bar

  • 2

    Bar diameter

    Ø 20 mm

  • 3

    Length

    250 mm

  • 4

    Clamping

    Through-hole screw

  • 5

    Insert shape

    Rhombic 80°

  • 6

    Style and lead angle

    κr 95° · offset

  • 7

    Insert clearance angle

    7°

  • 8

    Hand

    Right-hand

  • 9

    Insert size

    9.7 mm edge · inscribed circle Ø 9.525 mm

S20S-SCLCR09 specifications

Bar
Ø 20 mm · steel
Clamping
S · screw clamp
Lead angle κr
95° · offset
Hand
right-hand
Length
250 mm
Insert
CCMT 09… (shape C, clearance C)

What S20S-SCLCR09 is used for

A Ø 20 mm, 250 mm steel boring bar with positive CCMT 09 inserts at 95°: it bores, faces bottoms and makes square shoulders in bores from about 25 mm, depending on the brand.

Being steel, it works well up to about 80 mm overhang (4 times the diameter); beyond that it chatters and a carbide or anti-vibration bar is the better choice.

Hold it in a split sleeve or bar holder that grips the whole clamping length, not with a single screw: the clamping vibrates too.

Bore and overhang with a Ø 20 bar

Minimum bore (approx.)

≈ Ø 27 mm

Comfortable overhang

≤ 60 mm (3×D)

Maximum overhang (steel)

≤ 80 mm (4×D)

Other versions of S20S-SCLCR09

CodeClampingHandShank / barLengthInsert
S20S-SCLCR09S · screw clamprightØ 20 mm250 mmCCMT 09…
S20S-SCLCL09S · screw clampleftØ 20 mm250 mmCCMT 09…
S16R-SCLCR06S · screw clamprightØ 16 mm200 mmCCMT 06…
S25T-SCLCR09S · screw clamprightØ 25 mm300 mmCCMT 09…

Inserts it takes

Full guide: how to read any toolholder code