Calculadora de Ajuste H7/n6
Visual, interactive ISO 286 tolerance calculator to view min/max limits, clearance, transition and interference on shaft and hole fits such as H7/g6, H7/h6, H7/k6 or H7/p6.
Ajuste ISO 286
Hole
Class
H7
Shaft
Class
n6
Cross-section view of the fit
Tolerances visually exaggerated to make the type of fit clear.
Actual hole
50.000 a 50.025 mm
Tolerancia: 0.000 a 0.025 mm
Actual shaft
50.017 a 50.033 mm
Tolerancia: 0.017 a 0.033 mm
Holgura/apriete
-0.033 a 0.008 mm
Difference between the allowed hole and the allowed shaft.
Transición fuerte
Preset H7/n6
Centring with a small interference; may need a light press.
Quick reading
How to interpret it
Hole H7 and shaft n6. If the minimum clearance is negative there can be interference. If both clearances are positive there is always play.
There may be a small percentage of error against the official standard, since it isn't legal to reproduce the full ISO tables verbatim. Always validate with official ISO 286 and the controlled drawing before making critical parts.
H7/n6 fit: limits by diameter (ISO 286)
Firm transition. Centring with a small interference; may need a light press.
Example at Ø25 mm: hole H7 from 0 to +21 µm and shaft n6 from +15 to +28 µm, which gives anything from 28 µm of interference to 6 µm of clearance.
How it is made: the H7 hole (IT7) by reaming, fine boring or internal grinding; the n6 shaft (IT6) by grinding or fine turning on a machine in good condition. Check both with a plug gauge and a micrometer, not with a caliper.
How it is assembled: by hand or with light taps of a soft-faced mallet; depending on the actual sizes it may be loose or slightly tight.
| Ø range (mm) | Hole H7 | Shaft n6 | Min. clearance | Max. clearance |
|---|---|---|---|---|
| 1–3 | 0 / +9 | +6 / +11 | -11 | +3 |
| 3–6 | 0 / +12 | +8 / +16 | -15 | +4 |
| 6–10 | 0 / +14 | +10 / +19 | -19 | +4 |
| 10–18 | 0 / +17 | +12 / +23 | -23 | +5 |
| 18–30 | 0 / +21 | +15 / +28 | -28 | +6 |
| 30–50 | 0 / +25 | +17 / +33 | -33 | +8 |
| 50–80 | 0 / +30 | +21 / +39 | -39 | +9 |
| 80–120 | 0 / +35 | +24 / +46 | -45 | +11 |
| 120–180 | 0 / +40 | +27 / +53 | -52 | +13 |
| 180–250 | 0 / +46 | +31 / +60 | -60 | +15 |
| 250–315 | 0 / +52 | +34 / +66 | -66 | +18 |
| 315–400 | 0 / +57 | +37 / +72 | -72 | +20 |
| 400–500 | 0 / +62 | +40 / +79 | -79 | +22 |
Mathematical formula of the ISO tolerance system
First the IT tolerance is obtained and then it is positioned according to the letter.
1. Anchura IT
i = 0,45 · ∛D + 0,001 · D
`D` is the mean diameter of the nominal range. The multiplier is then applied: IT6 = 10i, IT7 = 16i, IT8 = 25i, IT9 = 40i.
2. Position of the letter
H7, K11, g6, p6...
The letter places the area with respect to the nominal. Uppercase for hole (`ES/EI`) and lowercase for axis (`es/ei`).
3. Resultado de montaje
holgura = agujero - eje
If the minimum clearance is positive, it is a clearance fit. If the maximum is negative, it is an interference fit. If it crosses zero, it is a transition fit.
Hole
Shaft
Clearance
The IT formula is public and indicative; the fundamental deviations per letter are computed by the tool's engine. For critical production, always validate against official ISO 286 and the controlled drawing.
ISO fits most used on the shop floor
From the loosest to the tightest. Open the fit you need to see the hole and shaft deviations, the resulting clearance or interference and how to assemble it.
Fit H11/c11
Muy libre
Coarse joints, agricultural machinery, dirt or large thermal variations.
Fit H9/d9
Holgura amplia
Easy assembly, free rotation, dirt, temperature or less precise manufacturing.
Fit H8/f7
Giro libre
Shafts with moderate rotation, bushings and lubricated bearings.
Fit H7/g6
Precision sliding fit
Shafts sliding with little clearance, guides and precision fits.
Fit H7/h6
Clearance/location
Hand assembly with a very close or line-to-line fit.
Fit H7/js6
Centred transition
Centring with a possible small clearance or interference.
Fit H7/k6
Light transition
Precise centring with a possible light tap or small interference.
Fit H7/n6
Firm transition
Centring with a small interference; may need a light press.
Fit H7/p6
Apriete ligero
Light press fits, bushings or small pinions.
Fit H7/r6
Apriete medio
Press fits with good torque transmission and difficult disassembly.
Fit H7/s6
Apriete medio
Permanent joints using a press or a thermal difference.
Fit H7/u6
Apriete fuerte
Permanent assemblies, normally with a powerful press, heating or cooling.
Related tools
GD&T symbols
Look up the meaning of every drawing symbol: GD&T geometric tolerances (flatness, position, concentricity...), ISO 10135 casting, heat treatment, inspection and welding, with practical shop-floor explanations.
Thermal expansion
Works out ΔL with α corrected for the temperature you work at, corrects a reading to 20 °C using the part and the instrument you measured with, tells you how far to heat the bore or chill the shaft to fit, and how long to wait before measuring.
Inspection Plans
Upload a plan, extract dimensions and GD&T with AI and export your inspection guideline in PDF or CSV.