Skip to content
Back to ISO toolholder code

MVJNR 2525M16: what the toolholder code means

MVJNR 2525M16 is a right-hand external turning toolholder with top clamp and pin, 93° lead angle κr (offset shank). Shank 25 × 25 mm, 150 mm long. It takes 35° rhombic inserts such as VNMG 16… (size 16).

Insert it takesVNMG 16…VNMM 16…
fκr 93°L 15025 × 25

External toolholder · ISO 5608

  • 1

    Clamping

    Top clamp and pin in the hole

  • 2

    Insert shape

    Rhombic 35°

  • 3

    Style and lead angle

    κr 93° · offset

  • 4

    Insert clearance angle

    0° (negative)

  • 5

    Hand

    Right-hand

  • 6

    Shank height

    25 mm

  • 7

    Shank width

    25 mm

  • 8

    Length

    150 mm

  • 9

    Insert size

    16.6 mm edge · inscribed circle Ø 9.525 mm

MVJNR 2525M16 specifications

Clamping
M · top clamp and pin
Lead angle κr
93° · offset
Hand
right-hand
Shank (height × width)
25 × 25 mm
Length
150 mm
Insert
VNMG 16… (shape V, clearance N)

What MVJNR 2525M16 is used for

A copying holder for VNMG 16 inserts (35°, negative) with top clamp and pin. At 93° with a 35° corner it reaches very tight profiles and, being negative, takes more load than the positive SVJBR version with VBMT.

Behind the insert there are 52° of clearance (180 − 93 − 35): it can go down much steeper copying ramps than a 55° holder.

It is common on medium CNC lathes for shafts with radii, tapers and grooves. The 35° corner is still the most fragile: moderate cuts and no impacts.

Other versions of MVJNR 2525M16

CodeClampingHandShank / barLengthInsert
MVJNR 2525M16M · top clamp and pinright25 × 25 mm150 mmVNMG 16…
MVJNL 2525M16M · top clamp and pinleft25 × 25 mm150 mmVNMG 16…
MVJNR 2020K16M · top clamp and pinright20 × 20 mm125 mmVNMG 16…

Similar toolholders

Full guide: how to read any toolholder code