Skip to content
Back to ISO toolholder code

SDJCR 2020K11: what the toolholder code means

SDJCR 2020K11 is a right-hand external turning toolholder with screw clamp, 93° lead angle κr (offset shank). Shank 20 × 20 mm, 125 mm long. It takes 55° rhombic inserts such as DCMT 11… (size 11).

Insert it takesDCMT 11…DCGT 11…
fκr 93°L 12520 × 20

External toolholder · ISO 5608

  • 1

    Clamping

    Through-hole screw

  • 2

    Insert shape

    Rhombic 55°

  • 3

    Style and lead angle

    κr 93° · offset

  • 4

    Insert clearance angle

    7°

  • 5

    Hand

    Right-hand

  • 6

    Shank height

    20 mm

  • 7

    Shank width

    20 mm

  • 8

    Length

    125 mm

  • 9

    Insert size

    11.6 mm edge · inscribed circle Ø 9.525 mm

SDJCR 2020K11 specifications

Clamping
S · screw clamp
Lead angle κr
93° · offset
Hand
right-hand
Shank (height × width)
20 × 20 mm
Length
125 mm
Insert
DCMT 11… (shape D, clearance C)

What SDJCR 2020K11 is used for

A copying holder for DCMT 11 inserts (55°, positive, screw-clamped): at 93° it profiles and makes shoulders, and the 55° corner reaches grooves and radii an 80° insert cannot.

It is typical on small and Swiss-type lathes, on aluminium or steel parts with profiles. Behind the insert there are 32° of clearance (180 − 93 − 55): the steepest ramp it can go down while copying without rubbing.

Typical mistake: programming ramps steeper than those 32° so the insert flank rubs. If the profile needs it, move to a 35° insert.

Other versions of SDJCR 2020K11

CodeClampingHandShank / barLengthInsert
SDJCR 2020K11S · screw clampright20 × 20 mm125 mmDCMT 11…
SDJCL 2020K11S · screw clampleft20 × 20 mm125 mmDCMT 11…
SDJCR 1616H11S · screw clampright16 × 16 mm100 mmDCMT 11…
SDJCR 2525M11S · screw clampright25 × 25 mm150 mmDCMT 11…

Similar toolholders

Full guide: how to read any toolholder code