Skip to content

Import your DXF from the editor menu, check it, fix it and dimension it. Then download a DXF for CAM or laser cutting, or a PDF for the shop floor. The file stays in your browser.

NOTES1. Dimensions in mm.GETGCODE · PLANO TÉCNICOMATERIAL-GENERAL TOLERANCE-SCALE1:1TITLEDOCUMENT TYPEComponent drawingCREATED BY-APPROVED BY-DATE OF ISSUE2026-11-18REV.-SHEET1/1123456ABCDgetgcode.comA4

Line · 1/2Click the start point · Click the start and the end (or drag). It snaps to corners, midpoints, centres and intersections; with Shift, straight horizontal or vertical.

Guide

How to open and edit a DXF without installing CAD

DXF is the exchange format between CAD and CAM programs: laser cutters ask for it, almost every CAD exports it and your CAM reads it. A small change does not need a license: open the file in the browser, edit it and save it again.

1

Import the DXF

Pick the file from the editor and it shows up with its layers. Lines, polylines, circles, arcs, text and dimensions are read. If your file is a DWG, open it in your CAD first and use Save As DXF: DWG files cannot be opened here.

2

Check the size

Measure before you change anything. A DXF does not always store its units, so a file drawn in inches can open 25.4 times too small. Dimension something you know, such as the overall length, and check that it matches.

3

Edit what you need

Trim, extend, move, copy, offset or fillet, as in desktop CAD and with the same shortcuts (L, TR, EX, O, CO). Object snap catches endpoints, centers and midpoints of the existing geometry.

4

Download as DXF or PDF

The DXF carries geometry, dimensions, text and layers, ready for CAM or cutting. The PDF is the sheet with its title block, ready to print. For laser or waterjet cutting, leave only the cutting outline in the DXF: dimensions and the title block are not needed and can confuse the machine.

Frequently asked questions

DXF editor FAQ

Can I open a DXF without AutoCAD?

Yes. DXF is an open format and this editor reads it in the browser on Windows, Mac or Linux. AutoCAD is an Autodesk trademark; GetGCode is not affiliated with it.

Does it open DWG files?

No. DWG is a closed format. Save the file as DXF from the program that created it and open it here.

Is my file uploaded to a server?

No. The DXF is read in your browser and saved on your computer. It is only uploaded if you choose to share the drawing with a link, which needs an account.

Why does my DXF look tiny or huge?

Almost always units: the file was drawn in inches or meters and is read as millimeters. Measure a known dimension and, if it is off, scale the drawing by 25.4 (inches) or by 1000 (meters).

Will the DXF work in my CAM or for laser cutting?

Yes, that is its most common use. Check first that outlines are closed and that no lines are stacked on top of each other: those are the two usual reasons a CAM or a laser rejects the file.

Keep going

Related apps