Skip to content

Title block for technical drawings: fields and template

The editor includes the sheet with its title block in A4 to A0. Fill in your details once, save it as a template and it is ready for every new drawing. It downloads with the drawing as PDF or DXF.

NOTES1. Dimensions in mm.GETGCODE · PLANO TÉCNICOMATERIAL-GENERAL TOLERANCE-SCALE1:1TITLEDOCUMENT TYPEComponent drawingCREATED BY-APPROVED BY-DATE OF ISSUE2026-11-18REV.-SHEET1/1123456ABCDgetgcode.comA4

Line · 1/2Click the start point · Click the start and the end (or drag). It snaps to corners, midpoints, centres and intersections; with Shift, straight horizontal or vertical.

Guide

What a drawing title block must contain

The title block is the data box in the bottom right corner of the sheet. It identifies the drawing: which part it is, who made it, which revision it is and at what scale. A drawing without a complete title block cannot be filed or reviewed, and it is one of the first things an audit checks.

1

Identification fields

ISO 7200 marks eight fields as mandatory: the legal owner (the company), the identification number, the title, the date of issue, the sheet number, the creator, the approver and the document type. The revision index is optional in the standard, but essential on the shop floor: it tells you whether the paper at the machine is the current one.

2

Part data

What the shop needs before starting: material with its full designation («C45E» or «1.1191», not just «steel»), heat or surface treatment if any, scale and the projection method symbol (first angle in Europe, third angle in the United States). Note that the current ISO 7200 does not count these as title block fields; scale and projection symbol are shown outside, next to it. In practice many companies still put them inside, which is fine if your customer accepts it.

3

General tolerances and finish

Next to the title block goes the general tolerance for dimensions without their own, usually «ISO 2768-m», and the general surface finish, for example «Ra 3.2». This keeps the drawing clean: only what departs from the general case is toleranced and marked. If you use «ISO 2768-mK», note that the capital letter comes from part 2 of the standard (general geometrical tolerances), withdrawn in 2021 and replaced by ISO 22081.

4

Size and position

It sits in the bottom right corner of the drawing space (ISO 5457), so it stays visible when the drawing is folded. It is sized to fit the usable width of an A4 sheet, 180 mm, so the same block works on every sheet size. The sheet has a 20 mm filing margin on the left and 10 mm elsewhere.

Frequently asked questions

Title block FAQ

Can I save my title block as a template?

Yes. Fill in the company, the author and the fields that repeat, save it as a template and new drawings start with those fields filled in. It is stored in your browser.

Which sheet sizes are available?

A4 to A0, portrait or landscape. When you change size or scale, the title block stays in the bottom right corner at its own size.

Can the title block be downloaded as DXF?

Yes. The DXF download includes the sheet with the title block and its text, and opens in other CAD programs. The PDF is ready to print to scale.

What is the revision index?

The letter or number that changes every time the drawing is modified (A, B, C…). Each change is logged with its date and a short description. It prevents parts being made from an old version.

Is ISO 7200 mandatory?

It is not a legal requirement; it applies when a contract or a customer standard asks for it. If your company has its own title block, what matters is that it carries the identification and revision fields.

Keep going

Related apps