M10/M11: Clamping open/close
M-codes frequently used for chuck, collet or clamping, although they depend on the PLC.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Auxiliary
- Machine
- Turning, Mill-turn
- Risk
- High
- Example
- M10 / M11
M10 / M11Machine: Turning, Mill-turnRisk: High
Haas · Fanuc
- Haas: On Haas lathes it can be linked to chuck clamp/unclamp.
- Fanuc: Manufacturer/PLC function; do not assume universal equivalence.
Other codes in Auxiliary
Frequently Asked Questions (FAQ)
What does M10/M11 mean in a CNC program?
M-codes frequently used for chuck, collet or clamping, although they depend on the PLC. In the catalogue it appears as "Clamping open/close", within the Auxiliary family.
Can you give me an example of M10/M11?
M10 / M11 — M-codes frequently used for chuck, collet or clamping, although they depend on the PLC.
Which machines use M10/M11?
M10/M11 is used in: Turning, Mill-turn.
What should you watch out for with M10/M11?
High risk: a mistake here can cause a crash, a broken tool or an out-of-tolerance part. Simulate the program and dry-run it before cutting.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.