M48/M49: Enable/disable override
Allows or blocks feed/spindle overrides depending on the control.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Auxiliary
- Machine
- Milling, Turning, Mill-turn
- Risk
- Medium
- Example
- M48 / M49
M48 / M49Machine: Milling, Turning, Mill-turnRisk: Medium
Fanuc
M48 / M49- Useful for protecting critical feeds; may vary with the PLC.
Haas
- Confirm exact behavior in machine settings.
Other codes in Auxiliary
Frequently Asked Questions (FAQ)
What does M48/M49 mean in a CNC program?
Allows or blocks feed/spindle overrides depending on the control. In the catalogue it appears as "Enable/disable override", within the Auxiliary family.
How is M48/M49 written on each control?
Fanuc: M48 / M49. The exact syntax depends on the control version and the machine parameters: always confirm with the manufacturer's manual.
Can you give me an example of M48/M49?
M48 / M49 — Allows or blocks feed/spindle overrides depending on the control.
Which machines use M48/M49?
M48/M49 is used in: Milling, Turning, Mill-turn.
What should you watch out for with M48/M49?
Medium risk: it rarely breaks anything on its own, but a wrong value shows up on the part. Check the block before running the batch.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.