M158/M159: Mist extractor
Activates/deactivates condenser or mist extractor on equipped machines.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Auxiliary
- Machine
- Milling, Turning, Mill-turn
- Risk
- Low
- Example
- M158 / M159
M158 / M159Machine: Milling, Turning, Mill-turnRisk: Low
Haas
- Optional mist condenser function on some Haas.
Other codes in Auxiliary
Frequently Asked Questions (FAQ)
What does M158/M159 mean in a CNC program?
Activates/deactivates condenser or mist extractor on equipped machines. In the catalogue it appears as "Mist extractor", within the Auxiliary family.
Can you give me an example of M158/M159?
M158 / M159 — Activates/deactivates condenser or mist extractor on equipped machines.
Which machines use M158/M159?
M158/M159 is used in: Milling, Turning, Mill-turn.
What should you watch out for with M158/M159?
Low risk: it is a state instruction that rarely causes damage on its own, although it is worth writing it out so you do not depend on the machine's previous state.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.