M37/M38: Conveyor or auxiliary function
M-codes used by some manufacturers for chip conveyor, parts or auxiliaries.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Auxiliary
- Machine
- Milling, Turning, Mill-turn
- Risk
- Medium
- Example
- M37 / M38
M37 / M38Machine: Milling, Turning, Mill-turnRisk: Medium
Fanuc · Haas
- Fanuc: PLC dependent function.
- Haas: In Haas lathe M38/M39 it can be spindle speed variation.
Other codes in Auxiliary
Frequently Asked Questions (FAQ)
What does M37/M38 mean in a CNC program?
M-codes used by some manufacturers for chip conveyor, parts or auxiliaries. In the catalogue it appears as "Conveyor or auxiliary function", within the Auxiliary family.
Can you give me an example of M37/M38?
M37 / M38 — M-codes used by some manufacturers for chip conveyor, parts or auxiliaries.
Which machines use M37/M38?
M37/M38 is used in: Milling, Turning, Mill-turn.
What should you watch out for with M37/M38?
Medium risk: it rarely breaks anything on its own, but a wrong value shows up on the part. Check the block before running the batch.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.