M334/M335: P-Cool setting
Increase or decrease programmable refrigerant position on equipped machines.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Coolant
- Machine
- Milling, Mill-turn
- Risk
- Low
- Example
- M334 / M335
M334 / M335Machine: Milling, Mill-turnRisk: Low
Haas
- P-Cool increment/decrement on Haas with option installed.
Other codes in Coolant
See the full list of G and M codesFrequently Asked Questions (FAQ)
What does M334/M335 mean in a CNC program?
Increase or decrease programmable refrigerant position on equipped machines. In the catalogue it appears as "P-Cool setting", within the Coolant family.
Can you give me an example of M334/M335?
M334 / M335 — Increase or decrease programmable refrigerant position on equipped machines.
Which machines use M334/M335?
M334/M335 is used in: Milling, Mill-turn.
What should you watch out for with M334/M335?
Low risk: it is a state instruction that rarely causes damage on its own, although it is worth writing it out so you do not depend on the machine's previous state.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.