M373/M374: Tool Air Blast
Activates/deactivates air blowing per tool on equipped machines.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Coolant
- Machine
- Milling, Mill-turn
- Risk
- Medium
- Example
- M373 / M374
M373 / M374Machine: Milling, Mill-turnRisk: Medium
Haas
- TAB on/off on Haas with tool air blast option.
Other codes in Coolant
See the full list of G and M codesFrequently Asked Questions (FAQ)
What does M373/M374 mean in a CNC program?
Activates/deactivates air blowing per tool on equipped machines. In the catalogue it appears as "Tool Air Blast", within the Coolant family.
Can you give me an example of M373/M374?
M373 / M374 — Activates/deactivates air blowing per tool on equipped machines.
Which machines use M373/M374?
M373/M374 is used in: Milling, Mill-turn.
What should you watch out for with M373/M374?
Medium risk: it rarely breaks anything on its own, but a wrong value shows up on the part. Check the block before running the batch.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.