M388/M389: Advanced through-spindle coolant
Turns spindle coolant on/off on some modern Haas machines.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Coolant
- Machine
- Milling, Mill-turn
- Risk
- Medium
- Example
- M388 / M389
M388 / M389Machine: Milling, Mill-turnRisk: Medium
Haas
- TSC on/off on some Haas; Do not confuse with M88/M89 depending on the model.
Other codes in Coolant
See the full list of G and M codesFrequently Asked Questions (FAQ)
What does M388/M389 mean in a CNC program?
Turns spindle coolant on/off on some modern Haas machines. In the catalogue it appears as "Advanced through-spindle coolant", within the Coolant family.
Can you give me an example of M388/M389?
M388 / M389 — Turns spindle coolant on/off on some modern Haas machines.
Which machines use M388/M389?
M388/M389 is used in: Milling, Mill-turn.
What should you watch out for with M388/M389?
Medium risk: it rarely breaks anything on its own, but a wrong value shows up on the part. Check the block before running the batch.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.