M52/M53: Adaptive feed control / feed stop
Controls adaptive feed or feed stop functions in LinuxCNC or other supported controls.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Automation
- Machine
- Milling, Turning, Mill-turn
- Risk
- Medium
- Example
- M52 P1 / M53 P0
M52 P1 / M53 P0Parameters
- P
- P1 activa / P0 desactiva la función (avance adaptativo o parada de avance según máquina).
Machine: Milling, Turning, Mill-turnRisk: Medium
ISO común · Fanuc
- ISO común: Common on LinuxCNC; not universal in Fanuc/Haas.
- Fanuc: Equivalence depends on the PLC/adaptive control of the machine.
Other codes in Automation
Frequently Asked Questions (FAQ)
What does M52/M53 mean in a CNC program?
Controls adaptive feed or feed stop functions in LinuxCNC or other supported controls. In the catalogue it appears as "Adaptive feed control / feed stop", within the Automation family.
Can you give me an example of M52/M53?
M52 P1 / M53 P0 — Controls adaptive feed or feed stop functions in LinuxCNC or other supported controls.
Which machines use M52/M53?
M52/M53 is used in: Milling, Turning, Mill-turn.
What should you watch out for with M52/M53?
Medium risk: it rarely breaks anything on its own, but a wrong value shows up on the part. Check the block before running the batch.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.